Derni猫res mises 脿 jour en lien avec la COVID-19 disponibles ici.
Latest information about COVID-19 available here.
Note: This is the 2021鈥�2022 eCalendar. Update the year in your browser's URL bar for the most recent version of this page, or .
Program Requirements
Program credit weight: 142 credits
Program credit weight for Quebec CEGEP students: 113 credits
Program credit weight for out-of-province students: 142 credits
To prepare the mechanical engineer for a wide range of career possibilities, there is a heavy emphasis in our curriculum on the fundamental analytical disciplines. This is balanced by a sequence of experimental and design engineering courses which include practice in design, manufacturing, and experimentation. In these courses, students learn how to apply their analytical groundwork to the solution of practical problems.
Special interests are satisfied by selecting appropriate complementary courses from among those offered with a specific subject concentration, such as management, industrial engineering, computer science, controls and robotics, bio-engineering, aeronautics, combustion, systems engineering, etc.
Required Year 0 (Freshman) Courses
29 credits
Generally, students admitted to Engineering from Quebec CEGEPs are granted transfer credit for these Year 0 (Freshman) courses and enter a 113-credit program.
For information on transfer credit for French Baccalaureate, International Baccalaureate exams, Advanced Placement exams, Advanced Levels, and Science Placement Exams, see and select your term of admission.
-
CHEM 110 General Chemistry 1 (4 credits)
Overview
Chemistry : A study of the fundamental principles of atomic structure, radiation and nuclear chemistry, valence theory, coordination chemistry, and the periodic table.
Terms: Fall 2021
Instructors: Sirjoosingh, Pallavi; McKeague, Maureen; Huot, Mitchell (Fall)
Fall
Prerequisites/corequisites: College level mathematics and physics or permission of instructor; CHEM 120 is not a prerequisite
Each lab section is limited enrolment
-
CHEM 120 General Chemistry 2 (4 credits)
Overview
Chemistry : A study of the fundamental principles of physical chemistry.
Terms: Winter 2022
Instructors: Huot, Mitchell; Sirjoosingh, Pallavi; Sewall, Samuel Lewis; Wiseman, Paul (Winter)
Winter
Prerequisites/corequisites: College level mathematics and physics, or permission of instructor: CHEM 110 is not a prerequisite
Each lab section is limited enrolment
-
MATH 133 Linear Algebra and Geometry (3 credits)
Overview
Mathematics & Statistics (Sci) : Systems of linear equations, matrices, inverses, determinants; geometric vectors in three dimensions, dot product, cross product, lines and planes; introduction to vector spaces, linear dependence and independence, bases. Linear transformations. Eigenvalues and diagonalization.
Terms: Fall 2021, Winter 2022, Summer 2022
Instructors: B茅langer-Rioux, Rosalie; Bibby, Sean; Chinis, Jake; Li, Wanlin; Alfieri, Antonio (Fall) Fortier, J茅r么me (Winter) Leroux-Lapierre, Alexis (Summer)
3 hours lecture, 1 hour tutorial
Prerequisite: a course in functions
Restriction A: Not open to students who have taken MATH 221 or CEGEP objective 00UQ or equivalent.
Restriction B: Not open to students who have taken or are taking MATH 123, except by permission of the Department of Mathematics and Statistics.
Restriction C: Not open to students who are taking or have taken MATH 134.
-
MATH 140 Calculus 1 (3 credits)
Overview
Mathematics & Statistics (Sci) : Review of functions and graphs. Limits, continuity, derivative. Differentiation of elementary functions. Antidifferentiation. Applications.
Terms: Fall 2021, Winter 2022, Summer 2022
Instructors: Trudeau, Sidney; Nazari Zahraei Motlagh, Erfan; Sabbagh, Magid (Fall) Kelome, Djivede (Winter) Abdenbi, Brahim (Summer)
3 hours lecture, 1 hour tutorial
Prerequisite: High School Calculus
Restriction: Not open to students who have taken MATH 120, MATH 139 or CEGEP objective 00UN or equivalent
Restriction: Not open to students who have taken or are taking MATH 122, except by permission of the Department of Mathematics and Statistics
Each Tutorial section is enrolment limited
-
MATH 141 Calculus 2 (4 credits)
Overview
Mathematics & Statistics (Sci) : The definite integral. Techniques of integration. Applications. Introduction to sequences and series.
Terms: Fall 2021, Winter 2022, Summer 2022
Instructors: Macdonald, Jeremy; Albanese, Michael (Fall) Bibby, Sean; Fortier, J茅r么me; Cavallo, Alberto (Winter) Sabbagh, Magid; Barill, Gavin (Summer)
-
PHYS 131 Mechanics and Waves (4 credits)
Overview
Physics : The basic laws and principles of Newtonian mechanics; oscillations, waves, and wave optics.
Terms: Fall 2021
Instructors: Ragan, Kenneth J (Fall)
Fall
3 hours lectures; 1 hour tutorial, 3 hours laboratory in alternate weeks; tutorial sessions
Corequisite: MATH 139 or higher level calculus course.
Restriction(s): Not open to students who have taken or are taking PHYS 101, or who have taken CEGEP objective 00UR or equivalent.
Laboratory sections have limited enrolment
-
PHYS 142 Electromagnetism and Optics (4 credits)
Overview
Physics : The basic laws of electricity and magnetism; geometrical optics.
Terms: Winter 2022
Instructors: Guo, Hong (Winter)
Winter
3 hours lectures, 3 hours laboratory in alternate weeks; tutorial sessions
Prerequisite: PHYS 131.
Corequisite: MATH 141 or higher level calculus course.
Restriction: Not open to students who have taken or are taking PHYS 102, or who have taken CEGEP objective 00US or equivalent.
Laboratory sections have limited enrolment
AND 3 credits selected from the approved list of courses in Humanities and Social Sciences, Management Studies, and Law, listed below under Complementary Studies (Group B).
Note: FACC 100 (Introduction to the Engineering Profession) must be taken during the first year of study.
Required Non-Departmental Courses
33 credits
-
CCOM 206 Communication in Engineering (3 credits)
Overview
Communication (CCE) : Written and oral communication in Engineering (in English): strategies for generating, developing, organizing, and presenting ideas in a technical setting; problem-solving; communicating to different audiences; editing and revising; and public speaking. Course work based on academic, technical, and professional writing in engineering.
Terms: Fall 2021, Winter 2022
Instructors: Golish, Aaron; Hung, Yvonne; Sundberg, Ross; Filion, Marianne; Baskind, Alana; Atallah, Bassel; Sacks, Steven; Scheer, Kodi; Newman, Terry; Pimentel-Lopes, Kelly; McCracken, Brennan (Fall) Sundberg, Ross; Hung, Yvonne; Bider, Noreen Jane; Newman, Terry; Popova, Emilia; Atallah, Bassel; Baskind, Alana; Sacks, Steven; McCracken, Brennan (Winter)
-
CIVE 207 Solid Mechanics (4 credits)
Overview
Civil Engineering : Stress-strain relationships; elastic and inelastic behaviour; performance criteria. Elementary and compound stress states, Mohr's circle. Shear strains, torsion. Bending and shear stresses in flexural members. Deflections of beams. Statically indeterminate systems under flexural and axial loads. Columns. Dynamic loading.
Terms: Fall 2021, Winter 2022
Instructors: Shao, Yixin (Fall) Malomo, Daniele (Winter)
-
COMP 208 Computer Programming for Physical Sciences and
Engineering
(3 credits)
Overview
Computer Science (Sci) : Programming and problem solving in a high level computer language: variables, expressions, types, functions, conditionals, loops, objects and classes. Introduction to algorithms such as searching and sorting. Modular software design, libraries, file input and output, debugging. Emphasis on applications in Physical Sciences and Engineering, such as root finding, numerical integration, diffusion, Monte Carlo methods.
Terms: Fall 2021, Winter 2022
Instructors: Parekh, Deven (Fall) Parekh, Deven (Winter)
3 hours
Restrictions: Not open to students who have taken or are taking COMP 202, COMP 204, orGEOG 333; not open to students who have taken or are taking COMP 206 or COMP 250.
COMP 202 is intended as a general introductory course, while COMP 208 is intended for students with sufficient math background and in (non-life) science or engineering fields.
-
ECSE 461 Electric Machinery (3 credits)
Overview
Electrical Engineering : Electric and magnetic circuits. Notions of electromechanical energy conversion applied to electrical machines. Basic electrical machines - transformers, direct-current motors, synchronous motors and generators, three phase and single phase induction machines. Elements of modern electronically controlled electric drive systems.
Terms: Fall 2021, Winter 2022
Instructors: Wang, Xiaozhe (Fall) Wang, Xiaozhe (Winter)
(3-0-6)
Restriction: Not open to students in Electrical Engineering.
Note: Tutorials assigned by instructor.
-
FACC 100 Introduction to the Engineering Profession (1 credit)
Overview
Faculty Course : Introduction to engineering practice; rights and code of conduct for students; professional conduct and ethics; engineer's duty to society and the environment; sustainable development; occupational health and safety; overview of the engineering disciplines taught at 缅北强奸.
Terms: Fall 2021, Winter 2022
Instructors: Frost, David (Fall) Frost, David (Winter)
(1.5-0-1.5)
-
FACC 250 Responsibilities of the Professional Engineer
Overview
Faculty Course : A course designed to provide all Engineering students with further training regarding their responsibilities as future Professional Engineers. Particular focus will be placed on three professional characteristics that future engineers must demonstrate: i) professionalism, ii) ethical and equitable behaviour, and iii) consideration of the impact of engineering on society and the environment.
Terms: Fall 2021, Winter 2022
Instructors: Razavinia, Nasim (Fall) Razavinia, Nasim (Winter)
Restriction(s): Open to undergraduate students registered in the Bioengineering, Bioresource Engineering, Chemical Engineering, Civil Engineering, Computer Engineering, Electrical Engineering, Materials Engineering, Mechanical Engineering, Mining Engineering, and Software Engineering (Faculty of Engineering) programs. Not open to U0 (Year 0)students.
(0-0-0.5)
-
FACC 300 Engineering Economy (3 credits)
Overview
Faculty Course : Introduction to the basic concepts required for the economic assessment of engineering projects. Topics include: accounting methods, marginal analysis, cash flow and time value of money, taxation and depreciation, discounted cash flow analysis techniques, cost of capital, inflation, sensitivity and risk analysis, analysis of R and D, ongoing as well as new investment opportunities.
Terms: Fall 2021, Winter 2022, Summer 2022
Instructors: Jassim, Raad (Fall) Jassim, Raad (Winter) Jassim, Raad (Summer)
(3-1-5)
Restriction: Not open to students who have taken MIME 310.
-
FACC 400 Engineering Professional Practice (1 credit)
Overview
Faculty Course : Laws, regulations and codes governing engineering professional practice. Responsibility and liability. Environmental legislation. Project and organization management. Relations between engineer and client. Technical practice - analysis, design, execution and operation.
Terms: Fall 2021, Winter 2022
Instructors: Kokkolaras, Michael (Fall) Yue, Stephen (Winter)
-
MATH 262 Intermediate Calculus (3 credits)
Overview
Mathematics & Statistics (Sci) : Series and power series, including Taylor's theorem. Brief review of vector geometry. Vector functions and curves. Partial differentiation and differential calculus for vector valued functions. Unconstrained and constrained extremal problems. Multiple integrals including surface area and change of variables.
Terms: Fall 2021, Winter 2022, Summer 2022
Instructors: Hoheisel, Tim; GONZALEZ, IVAN; Church, Kevin (Fall) Roth, Charles (Winter) Church, Kevin (Summer)
-
MATH 263 Ordinary Differential Equations for Engineers (3 credits)
Overview
Mathematics & Statistics (Sci) : First order ODEs. Second and higher order linear ODEs. Series solutions at ordinary and regular singular points. Laplace transforms. Linear systems of differential equations with a short review of linear algebra.
Terms: Fall 2021, Winter 2022, Summer 2022
Instructors: Jakobson, Dmitry; Shirazi, Mohammad (Fall) Trudeau, Sidney; Shirazi, Mohammad (Winter) Shirazi, Mohammad (Summer)
-
MATH 264 Advanced Calculus for Engineers (3 credits)
Overview
Mathematics & Statistics (Sci) : Review of multiple integrals. Differential and integral calculus of vector fields including the theorems of Gauss, Green, and Stokes. Introduction to partial differential equations, separation of variables, Sturm-Liouville problems, and Fourier series.
Terms: Fall 2021, Winter 2022, Summer 2022
Instructors: Lipnowski, Michael (Fall) B茅langer-Rioux, Rosalie (Winter) Bibby, Sean (Summer)
-
MATH 271 Linear Algebra and Partial Differential Equations (3 credits)
Overview
Mathematics & Statistics (Sci) : Applied Linear Algebra. Linear Systems of Ordinary Differential Equations. Power Series Solutions. Partial Differential Equations. Sturm-Liouville Theory and Applications. Fourier Transforms.
Terms: Fall 2021
Instructors: Roth, Charles (Fall)
-
MIME 260 Materials Science and Engineering (3 credits)
Overview
Mining & Materials Engineering : Structure properties and fabrication of metals, polymers, ceramics, composites; engineering properties: tensile, fracture, creep, oxidation, corrosion, friction, wear; fabrication and joining methods; principles of materials selection.
Terms: Fall 2021, Winter 2022
Instructors: Lee, Jinhyuk; Paray, Florence; Song, Jun (Fall) Yue, Stephen; Paray, Florence (Winter)
(2-2-5)
* Note: FACC 100 (Introduction to the Engineering Profession) must be taken during the first year of study.
Required Mechanical Engineering Courses
65 credits
-
MECH 201 Introduction to Mechanical Engineering (2 credits)
Overview
Mechanical Engineering : The practice of Mechanical Engineering: its scope and context. The role of Design. Introduction to the Design process. The role of engineering analysis and socio-economic factors in Design. Introduction to the individual mechanical engineering subjects and their role in Design. Case studies.
Terms: Fall 2021
Instructors: Higgins, Andrew J (Fall)
(3-0-3)
-
MECH 210 Mechanics 1 (2 credits)
Overview
Mechanical Engineering : Static equilibrium of particles and rigid bodies. Beams, trusses, frames and machines. Concept of work and energy. Static equilibrium and stability.
Terms: Fall 2021, Winter 2022
Instructors: Li, Jianyu; Lessard, Larry (Fall) Pasini, Damiano (Winter)
-
MECH 220 Mechanics 2 (4 credits)
Overview
Mechanical Engineering : Kinematics of particles and rigid bodies. Particle dynamics: force-momentum and work-energy approaches. Kinematics and kinetics of rigid bodies.
Terms: Fall 2021, Winter 2022
Instructors: Nahon, Meyer (Fall) Sharf, Inna (Winter)
-
MECH 240 Thermodynamics 1 (3 credits)
Overview
Mechanical Engineering : Thermodynamic systems and properties. First law of thermodynamics: energy, work and heat. State principle, p-v-T surfaces, phase equilibrium, ideal gas model. Second law of thermodynamics, entropy, exergy analysis. Energy analysis applied to steady and transient engineering systems including heat engines, refrigerators and heat pumps, air compressors.
Terms: Fall 2021, Winter 2022
Instructors: Mydlarski, Laurent B (Fall) Tetreault-Friend, Melanie (Winter)
(3-1-5)
Restrictions: Restricted to students in U1 or above.
-
MECH 262 Statistics and Measurement Laboratory (3 credits)
Overview
Mechanical Engineering : Introduction to probability: conditional probability, binomial and Poisson distributions, random variables, laws of large numbers. Statistical analysis associated with measurements; regression and correlation. Basic experimental laboratory techniques, including the measurement of strain, pressure, force, position, and temperature.
Terms: Fall 2021, Winter 2022
Instructors: Nedic, Jovan (Fall) Nedic, Jovan (Winter)
(3-2-4)
Corequisite: MATH 263
Restriction: Open to U1 students or higher.
-
MECH 290 Design Graphics for Mechanical Engineering (3 credits)
Overview
Mechanical Engineering : The design process, including free-hand sketching; from geometry construction to manufacturing drawings; the technology and standards of engineering graphic communication; designing with CAD software. The role of visualization in the production of mechanical engineering designs.
Terms: Fall 2021, Winter 2022
Instructors: Zhao, Yaoyao (Fall) Zhao, Yaoyao (Winter)
(2-3-4)
Restrictions: Not open to students who have taken MECH 289. Open only to Mechanical Engineering students. Open only to students in Year 1.
-
MECH 292 Design 1: Conceptual Design (3 credits)
Overview
Mechanical Engineering : Introduction to design. Problem formulation, idea generation, feasibility study, preliminary design, design, analysis, design evaluation, project management, and optimal design.
Terms: Fall 2021, Winter 2022
Instructors: Kokkolaras, Michael (Fall) Morozov, Alexei V (Winter)
-
MECH 309 Numerical Methods in Mechanical Engineering (3 credits)
Overview
Mechanical Engineering : Numerical techniques for problems commonly encountered in Mechanical Engineering are presented. Chebyshev interpolation, quadrature, roots of equations in one or more variables, matrices, curve fitting, splines and ordinary differential equations. The emphasis is on the analysis and understanding of the problem rather than the details of the actual numerical program.
Terms: Fall 2021, Winter 2022
Instructors: Forbes, James (Fall) Legrand, Mathias (Winter)
-
MECH 314 Dynamics of Mechanisms (3 credits)
Overview
Mechanical Engineering : First principles of analysis; motion; position; displacement; velocity; acceleration; force; inertia and its effects. Kinematic and dynamic analysis of rigid bodies in pure rotation and in pin-connected systems; dynamic balance. Rigid bodies in rolling contact; planetary gear-trains. Bodies in sliding contact; lower and higher sliding pairs.
Terms: Fall 2021, Winter 2022
Instructors: Kovecses, Jozsef (Fall) Kovecses, Jozsef (Winter)
(3-1-5)
Prerequisite: MECH 220.
-
MECH 315 Mechanics 3 (4 credits)
Overview
Mechanical Engineering : Single-degree-of-freedom systems; free vibrations; effect of damping; response to harmonic, periodic and arbitrary excitation. Lagrange's equations of motion. Vibrations of multi-degree-of-freedom systems. Continuous systems.
Terms: Fall 2021, Winter 2022
Instructors: Mongeau, Luc (Fall) Mongeau, Luc (Winter)
-
MECH 321 Mechanics of Deformable Solids (3 credits)
Overview
Mechanical Engineering : Modern phenomenological theories of the behaviour of engineering materials. Stress and strain concepts and introduction to constitutive theory. Applications of theory of elasticity and thermoelasticity. Introduction to finite element stress analysis methods.
Terms: Fall 2021, Winter 2022
Instructors: Hubert, Pascal (Fall) Li, Jianyu (Winter)
(3-1-5)
Prerequisite: CIVE 207
-
MECH 331 Fluid Mechanics 1 (3 credits)
Overview
Mechanical Engineering : Physical properties of fluids. Kinematics and dynamics of fluid flow: stress in a continuum, rates of strain, rotation. Control volume analysis; conservation of mass, linear momentum and energy; Euler and Bernoulli equations; Flow measurement. Dimensional analysis and dynamical similarity. Laminar and turbulent flow in pipes and boundary layers.
Terms: Fall 2021, Winter 2022
Instructors: Lee, Timothy (Fall) Lee, Timothy (Winter)
-
MECH 341 Thermodynamics 2 (3 credits)
Overview
Mechanical Engineering : Generalized thermodynamics relations. Real gas effects, gas tables, dense gas equations of state and generalized compressibility, enthalpy, and entropy charts. Vapour and gas power cycles (coal/nuclear power plants). Refrigerators and heat pumps. Psychrometry and air conditioning processes. Thermodynamics of reactive gas mixtures.
Terms: Fall 2021, Winter 2022
Instructors: Habashi, Wagdi George (Fall) Bergthorson, Jeffrey (Winter)
-
MECH 346 Heat Transfer (3 credits)
Overview
Mechanical Engineering : Basic concepts and overview. Steady and unsteady heat conduction. Fin Theory. Convective heat transfer: governing equations; dimensionless parameters; analogy between momentum and heat transfer. Design correlations for forced, natural, and mixed convection. Heat exchangers. Radiative heat transfer: black- and gray-body radiation; shape factors; enclosure theory. Thermal engineering design project.
Terms: Fall 2021, Winter 2022
Instructors: Tetreault-Friend, Melanie (Fall) Baliga, Bantwal (Winter)
-
MECH 360 Principles of Manufacturing (3 credits)
Overview
Mechanical Engineering : Theory and practice of modern manufacturing processes: machining, forming, and casting. Producing parts using computer assisted tools from CAD to CNC machining followed by measurement of part quality. Hands-on machining of parts.
Terms: Fall 2021, Winter 2022
Instructors: Sabih, Amar (Fall) Cao, Changhong (Winter)
-
MECH 362 Mechanical Laboratory 1 (2 credits)
Overview
Mechanical Engineering : Experiments will be performed in four areas: MECH 240 Thermodynamics, MECH 315 Vibrations, MECH 331 Fluid Mechanics 1, and MECH 346 Heat Transfer. Students should sign up to do experiments in one or more areas the term following the completion of one or more of the above courses. Students will not formally register for this course until the term in which they will complete all of the experiments.
Terms: Fall 2021, Winter 2022
Instructors: Sabih, Amar (Fall) Sabih, Amar (Winter)
-
MECH 383 Applied Electronics and Instrumentation (3 credits)
Overview
Mechanical Engineering : Discrete and integrated components, both analogue and digital. Characteristics of passive elements. Semiconductors, amplifiers, filters, oscillators, modulators, power supplies and nonlinear devices. Introduction to digital electronics. Transducer/signal conditioner interfacing considerations.
Terms: Fall 2021, Winter 2022
Instructors: St-Martin Cormier, Olivier (Fall) Sedal, Audrey (Winter)
-
MECH 393 Design 2: Machine Element Design (3 credits)
Overview
Mechanical Engineering : The design of machine elements for strength requirements in consideration of various methods of manufacture. Synthesis of mechanical systems to fulfill performance requirements, following the engineering design process. Static and fatigue failure prevention. Students form groups to work on a design project.
Terms: Fall 2021, Winter 2022
Instructors: Sabih, Amar (Fall) Sabih, Amar (Winter)
-
MECH 412 System Dynamics and Control (3 credits)
Overview
Mechanical Engineering : Modelling of physical linear time-invariant systems using transfer functions. Transient and steady-state response specifications. State space representation of systems. Frequency-response characterization. Stability. Feedback control systems. PID controller design. Root locus and frequency response design methods. Lead, lag and PID compensators.
Terms: Fall 2021, Winter 2022
Instructors: Mongeau, Luc (Fall) Forbes, James (Winter)
-
MECH 430 Fluid Mechanics 2 (3 credits)
Overview
Mechanical Engineering : Review of thermodynamics of gases, one dimensional isentropic flow and choking. Nozzles and wind tunnels. Normal shock waves. Flow in constant area ducts with friction and heat exchange. Compressible irrotational flow. Oblique shock waves and Prandtl-Meyer expansion. Supersonic aerofoil and wing theory.
Terms: Fall 2021, Winter 2022
Instructors: Timofeev, Evgeny (Fall) Higgins, Andrew J (Winter)
-
MECH 463D1 Design 3: Mechanical Engineering Project (3 credits)
Overview
Mechanical Engineering : Team project work typically involving the design, fabrication, verification, and application of a mechanical device/system, or experimental facility. The project work is complemented with lectures in the Fall term on topics related to design and management of design projects. Emphasis is on the completion of a project of professional quality.
Terms: Fall 2021
Instructors: Driscoll, Mark; Morozov, Alexei V; Mongrain, Rosaire (Fall)
(1-3-5)
Prerequisites: CCOM 206, MECH 260 or MECH 360, MECH 292, MECH 314, MECH 393, MIME 260
Students must register for both MECH 463D1 and MECH 463D2.
No credit will be given for this course unless both MECH 463D1 and MECH 463D2 are successfully completed in consecutive terms
-
MECH 463D2 Design 3: Mechanical Engineering Project (3 credits)
Overview
Mechanical Engineering : See MECH 463D1 for course description.
Terms: Winter 2022
Instructors: Driscoll, Mark; Morozov, Alexei V; Mongrain, Rosaire (Winter)
Prerequisite: MECH 463D1
No credit will be given for this course unless both MECH 463D1 and MECH 463D2 are successfully completed in consecutive terms
Technical Complementary Courses
9 credits
6 credits at the 300 level or higher, chosen from Mechanical Engineering courses (subject code MECH). One of these two courses (3 credits) must be from the following list:
-
CHEE 563 Biofluids and Cardiovascular Mechanics (3 credits) *
Overview
Chemical Engineering : Basic principles of circulation including vascular fluid and solid mechanics, modelling techniques, clinical and experimental methods and the design of cardiovascular devices.
Terms: This course is not scheduled for the 2021-2022 academic year.
Instructors: There are no professors associated with this course for the 2021-2022 academic year.
-
MECH 497 Value Engineering (3 credits)
Overview
Mechanical Engineering : Value Engineering is an in-depth analysis of an industrial product or process with a view to improving its design and/or performance to increase its worth. This is a workshop type of course. Projects will be supplied by industrial firms and students will work in teams with industrial personnel.
Terms: Winter 2022
Instructors: Zsombor-Murray, Paul Joseph; Thomson, Vincent (Winter)
(0-8-1)
Prerequisites: MECH 393 and completion of 45 credits
-
MECH 498 Interdisciplinary Design Project 1 (3 credits)
Overview
Mechanical Engineering : Completion of an individual project on an interdisciplinary theme with emphasis on a balanced combination on analysis and synthesis.
Terms: Fall 2021
Instructors: Sabih, Amar (Fall)
(1-2-6)
-
MECH 499 Interdisciplinary Design Project 2 (3 credits)
Overview
Mechanical Engineering : The individual project initiated in MECH 498 is continued and finalized in this course.
Terms: Winter 2022
Instructors: Sabih, Amar (Winter)
(1-2-6)
Corequisite: MECH 498.
-
MECH 513 Control Systems (3 credits)
Overview
Mechanical Engineering : State-space modelling and related linear algebra. Controllability and observability of linear time-invariant systems and corresponding tests, system realizations. Stability: Bounded-Input-Bounded-Output (BIBO), internal, Lyapunov. Linear state feedback control: pole placement and root locus design methods, linear quadratic regulator. State observers: full- and reduced-order designs, separation principle, Linear Quadratic Gaussian (LQG) design. Introduction to optimal control and optimal state estimation.
Terms: Winter 2022
Instructors: Forbes, James (Winter)
-
MECH 530 Mechanics of Composite Materials (3 credits)
Overview
Mechanical Engineering : Fiber-reinforced composites. Stress, strain, and strength of composite laminates and honeycomb structures. Failure modes and failure criteria. Environmental effects. Manufacturing processes. Design of composite structures. Computer modelling of composites. Computer techniques are utilized throughout the course.
Terms: Fall 2021
Instructors: Lessard, Larry (Fall)
(3-0-6)
Corequisite: MECH 321 or equivalent/instructor's permission.
-
MECH 532 Aircraft Performance, Stability and Control (3 credits)
Overview
Mechanical Engineering : Aircraft performance criteria such as range, endurance, rate of climb, maximum ceiling for steady and accelerated flight. Landing and take-off distances. Static and dynamic stability in the longitudinal (stick-fixed and stick-free) and coupled lateral and directional modes. Control response for all three modes.
Terms: Winter 2022
Instructors: Nahon, Meyer (Winter)
-
MECH 535 Turbomachinery and Propulsion (3 credits)
Overview
Mechanical Engineering : Introduction to propulsion: turboprops, turbofans and turbojets. Review of thermodynamic cycles. Euler turbine equation. Velocity triangles. Axial-flow compressors and pumps. Centrifugal compressors and pumps. Axial-flow turbines. Loss mechanisms. Dimensional analysis of turbomachines. Performance maps. 3-D effects. Introduction to numerical methods in turbomachines. Prediction of performance of gas turbines.
Terms: Fall 2021
Instructors: Habashi, Wagdi George (Fall)
-
MECH 536 Aerospace
Structures (3 credits)
Overview
Mechanical Engineering : Aircraft and spacecraft structural components and loads. Bending, shear, torsion and buckling of thin-walled open and closed sections. Structural idealization. Principle of stiffener / web construction. Trusses and isogrid structures. Wing spars and box beams. Fuselage frames and wing ribs. Analysis of riveted, bolted and adhesive joints. Sandwich structures analysis. Thermoelasticity analysis for spacecraft structures.
Terms: This course is not scheduled for the 2021-2022 academic year.
Instructors: There are no professors associated with this course for the 2021-2022 academic year.
-
MECH 543 Design with Composite Materials (3 credits)
Overview
Mechanical Engineering : Material systems/selection process. Cost vs. performance. Laminate layup procedures. Theory and application of filament winding of composite cylinders. Regular oven and autoclave oven curing, analysis of resulting material performance. Practical design considerations and tooling. Analysis of environmental considerations. Joining techniques. Analysis of test methods. Theory of repair techniques.
Terms: Winter 2022
Instructors: Lessard, Larry (Winter)
(3-3-3)
Prerequisite: MECH 530
-
MECH 544 Processing of Composite Materials (3 credits)
Overview
Mechanical Engineering : Composite processing science basic principles. Reinforcement properties; permeability, compaction. Resin properties; curing, viscosity, shrinkage. Heat transfer and cure kinetics; cure cycle optimization. Resin flow; infusion, thickness variations, fiber volume fraction distribution. Residual stresses; tool-part interaction, warpage control, spring-back, tool design. Thermoplastic composites; crystallization control, melting and consolidation.
Terms: Winter 2022
Instructors: Hubert, Pascal (Winter)
(3-0-6)
Prerequisite: MECH 530 or permission of instructor.
Restriction: This course requires the use of a finite element software, so experience with finite elements is recommended.
-
MECH 553 Design and Manufacture of Microdevices (3 credits)
Overview
Mechanical Engineering : Introduction to microelectromechanical systems (MEMS). Micromachining techniques (thin-film deposition; lithography; etching; bonding). Microscale mechanical behaviour (deformation and fracture; residual stresses; adhesion; experimental techniques). Materials- and process-selection. Process integration. Design of microdevice components to meet specified performance and reliability targets using realistic manufacturing processes.
Terms: This course is not scheduled for the 2021-2022 academic year.
Instructors: There are no professors associated with this course for the 2021-2022 academic year.
-
MECH 559 Engineering Systems Optimization (3 credits)
Overview
Mechanical Engineering : Introduction to systems-oriented engineering design optimization. Emphasis on i) understanding and representing engineering systems and their structure, ii) obtaining, developing, and managing adequate computational (physics- and data-based) models for their analysis, iii) constructing appropriate design models for their synthesis, and iv) applying suitable algorithms for their numerical optimization while accounting for systems integration issues. Advanced topics such as coordination of distributed problems and non-deterministic design optimization methods.
Terms: Fall 2021
Instructors: Kokkolaras, Michael (Fall)
(3-0-6)
-
MECH 560 Eco-design and Product Life Cycle Assessment
(3 credits)
Overview
Mechanical Engineering : Fundamentals of both product and process engineering with an emphasis on life cycle models and sustainability. Practical and theoretical topics, methodologies, principles, and techniques. Practical methods such as Life Cycle Analysis, eco-design strategies, streamlined Life Cycle Assessment, environmental impact assessment, and Life Cycle Engineering. Introduction to important product development theories and life cycle assessment theories.
Terms: Fall 2021
Instructors: Zhao, Yaoyao (Fall)
(3-0-6)
Prerequisite: MECH 360
-
MECH 563 Biofluids and Cardiovascular Mechanics (3 credits) *
Overview
Mechanical Engineering : Basic principles of circulation including vascular fluid and solid mechanics, modelling techniques, clinical and experimental methods and the design of cardiovascular devices.
Terms: Winter 2022
Instructors: Pagiatakis, Catherine (Winter)
-
MECH 565 Fluid Flow and Heat Transfer Equipment (3 credits)
Overview
Mechanical Engineering : Pipes and piping systems, pumps, and valves. Fans and building air distribution systems. Basic thermal design methods for fins and heat exchangers. Thermal design of shell-and-tube and compact heat exchangers.
Terms: Winter 2022
Instructors: Baliga, Bantwal (Winter)
-
MECH 573 Mechanics of Robotic Systems (3 credits)
Overview
Mechanical Engineering : Manipulator performance and design. Pick-and-place and continuous-path operations. Computation of rigid-body angular velocity and acceleration from point-data measurements. Inverse kinematics of serial manipulators with coupled architectures; kinetostatics of multifingered hands and walking machines. Kinematics and dynamics of parallel manipulators and wheeled mobile robots.
Terms: This course is not scheduled for the 2021-2022 academic year.
Instructors: There are no professors associated with this course for the 2021-2022 academic year.
(3-0-6)
Prerequisite: MECH 309 or MATH 317, and MECH 572 or permission of the instructor.
Since the course is open to both undergraduate and graduate students, and B- is the minimum passing mark for graduate students, this minimum mark will be relaxed for undergraduates. The regulations applicable to undergraduates will apply accordingly.
* Students select either CHEE 563 or MECH 563.
3 credits chosen from courses at the 300 level or higher (approved by the Department) in the Faculty of Engineering (including MECH courses) or from courses in the Faculty of Science, including MATH courses.
Complementary Studies
6 credits
Group A - Impact of Technology on Society
3 credits from the following:
-
ANTH 212 Anthropology of Development (3 credits)
Overview
Anthropology : Processes of developmental change, as they affect small communities in the Third World and in unindustrialized parts of developed countries. Problems of technological change, political integration, population growth, industrialization, urban growth, social services, infrastructure and economic dependency.
Terms: Winter 2022
Instructors: Moreira, Andrea (Winter)
Winter
-
BTEC 502 Biotechnology Ethics and Society (3 credits)
Overview
Biotechnology : Examination of particular social and ethical challenges posed by modern biotechnology such as benefit sharing, informed consent in the research setting, access to medical care worldwide, environmental safety and biodiversity and the ethical challenges posed by patenting life.
Terms: This course is not scheduled for the 2021-2022 academic year.
Instructors: There are no professors associated with this course for the 2021-2022 academic year.
Restriction: U3 and over.
-
ECON 225 Economics of the Environment (3 credits)
Overview
Economics (Arts) : A study of the application of economic theory to questions of environmental policy. Particular attention will be given to the measurement and regulation of pollution, congestion and waste and other environmental aspects of specific economies.
Terms: Fall 2021
Instructors: Boichev, Georgi (Fall)
Restriction: Not open to students who have taken 154-325 or 154-425
-
ECON 347 Economics of Climate Change (3 credits)
Overview
Economics (Arts) : The course focuses on the economic implications of, and problems posed by, predictions of global warming due to anthropogenic emissions of greenhouse gases. Attention is given to economic policies such as carbon taxes and tradeable emission permits and to the problems of displacing fossil fuels with new energy technologies.
Terms: Fall 2021, Winter 2022
Instructors: Cairns, Robert D (Fall) Cairns, Robert D (Winter)
-
ENVR 201 Society, Environment and Sustainability (3 credits)
Overview
Environment : This course deals with how scientific-technological, socio-economic, political-institutional and behavioural factors mediate society-environment interactions. Issues discussed include population and resources; consumption, impacts and institutions; integrating environmental values in societal decision-making; and the challenges associated with, and strategies for, promoting sustainability. Case studies in various sectors and contexts are used.
Terms: Fall 2021
Instructors: Manaugh, Kevin; Badami, Madhav Govind; Barrington-Leigh, Christopher; Cardille, Jeffrey; Temper, Leah (Fall)
Fall
Section 001: Downtown Campus
Section 051: Macdonald Campus
-
GEOG 200 Geographical Perspectives: World Environmental Problems (3 credits)
Overview
Geography : Introduction to geography as the study of nature and human beings in a spatial context. An integrated approach to environmental systems and the human organization of them from the viewpoint of spatial relationships and processes. Special attention to environmental problems as a constraint upon Third World development.
Terms: Fall 2021
Instructors: Meredith, Thomas C (Fall)
Fall
3 hours
-
GEOG 203 Environmental Systems (3 credits)
Overview
Geography : An introduction to system-level interactions among climate, hydrology, soils and vegetation at the scale of drainage basins, including the study of the global geographical variability in these land-surface systems. The knowledge acquired is used to study the impact on the environment of various human activities such as deforestation and urbanisation.
Terms: Fall 2021
Instructors: Chmura, Gail L; Moore, Timothy R; von Sperber, Christian (Fall)
Fall
3 hours
Restriction: Because of quantitative science content of course, not recommended for B.A. and B.Ed. students in their U0 year.
-
GEOG 205 Global Change: Past, Present and Future (3 credits)
Overview
Geography : An examination of global change, from the Quaternary Period to the present day involving changes in the physical geography of specific areas. Issues such as climatic change and land degradation will be discussed, with speculations on future environments.
Terms: Winter 2022
Instructors: Chmura, Gail L (Winter)
Winter
3 hours
-
GEOG 302 Environmental Management 1 (3 credits)
Overview
Geography : An ecological analysis of the physical and biotic components of natural resource systems. Emphasis on scientific, technological and institutional aspects of environmental management. Study of the use of biological resources and of the impact of individual processes.
Terms: Fall 2021, Summer 2022
Instructors: Meredith, Thomas C (Fall) Meredith, Thomas C (Summer)
3 hours
Prerequisite: Any 200-level course in Geography or MSE or BIOL 308 or permission of instructor.
**Due to the intensive nature of this course, the standard add/drop and withdrawal deadlines do not apply. Add/drop is the second lecture day and withdrawal is the fifth lecture day.
-
MGPO 440 Strategies for Sustainability (3 credits) *
Overview
Management Policy : This course explores the relationship between economic activity, management, and the natural environment. Using readings, discussions and cases, the course will explore the challenges that the goal of sustainable development poses for our existing notions of economic goals, production and consumption practices and the management of organizations.
Terms: Fall 2021, Winter 2022
Instructors: Robitaille, Jad; Khoury, Rabih (Fall) Khoury, Rabih (Winter)
Restriction: Open to U2, U3 students only
-
PHIL 343 Biomedical Ethics (3 credits)
Overview
Philosophy : An investigation of ethical issues as they arise in the practice of medicine (informed consent, e.g.) or in the application of medical technology (in vitro fertilization, euthanasia, e.g.)
Terms: Fall 2021
Instructors: Hirose, Iwao (Fall)
-
RELG 270 Religious Ethics and the Environment (3 credits)
Overview
Religious Studies : Environmental potential of various religious traditions and secular perspectives, including animal rights, ecofeminism, and deep ecology.
Terms: Winter 2022
Instructors: Farran, Andrea (Winter)
Fall: Macdonald Campus (Ste-Anne-de-Bellevue). Winter: Downtown Campus.
-
SOCI 235 Technology and Society (3 credits)
Overview
Sociology (Arts) : An examination of the extent to which technological developments impose constraints on ways of arranging social relationships in bureaucratic organizations and in the wider society: the compatibility of current social structures with the effective utilization of technology.
Terms: Fall 2021
Instructors: Smith, Michael R (Fall)
-
SOCI 312 Sociology of Work and Industry (3 credits)
Overview
Sociology (Arts) : The development of the world of work from the rise of industrial capitalism to the postindustrial age. Responses of workers and managers to changing organizational, technological and economic realities. Interrelations between changing demands in the workplace and the functioning of the labour market. Canadian materials in comparative perspective.
Terms: Fall 2021
Instructors: Eidlin, Barry (Fall)
-
URBP 201 Planning the 21st Century City (3 credits)
Overview
Urban Planning : The study of how urban planners respond to the challenges posed by contemporary cities world-wide. Urban problems related to the environment, shelter, transport, human health, livelihoods and governance are addressed; innovative plans to improve cities and city life are analyzed.
Terms: This course is not scheduled for the 2021-2022 academic year.
Instructors: There are no professors associated with this course for the 2021-2022 academic year.
(3-1-5)
* Note: Management courses have limited enrolment and registration dates. See Important Dates at .
Group B - Humanities and Social Sciences, Management Studies, and Law
3 credits at the 200 level or higher from the following departments:
Anthropology (ANTH)
Economics (any 200- or 300-level course excluding ECON 227, and ECON 337)
History (HIST)
Philosophy (excluding PHIL 210 and PHIL 310)
Political Science (POLI)
Psychology (excluding PSYC 204 and PSYC 305, but including PSYC 100)
Religious Studies (RELG) (excluding courses that principally impart language skills, such as Sanskrit, Tibetan, Tamil, New Testament Greek, and Biblical Hebrew) ***
School of Social Work (SWRK)
Sociology (excluding SOCI 350)
OR one of the following:
-
ARCH 528 History of Housing (3 credits)
Overview
Architecture : Indigenous housing both transient and permanent, from the standpoint of individual structure and pattern of settlements. The principal historic examples of houses including housing in the age of industrial revolution and contemporary housing.
Terms: Winter 2022
Instructors: Sijpkes, Pieter (Winter)
(2-0-7)
Prerequisite: ARCH 251 or permission of instructor
-
BUSA 465 Technological Entrepreneurship (3 credits) *
Overview
Business Admin : Concentrating on entrepreneurship and enterprise development, particular attention is given to the start-up, purchasing and management of small to medium-sized industrial firms. The focal point is in understanding the dilemmas faced by entrepreneurs, resolving them, developing a business plan and the maximum utilization of the financial, marketing and human resources that make for a successful operation.
Terms: Fall 2021, Winter 2022
Instructors: Taherizadeh, Amir (Fall) Taherizadeh, Amir (Winter)
-
CLAS 203 Greek Mythology (3 credits)
Overview
Classics : A survey of the myths and legends of Ancient Greece.
Terms: Winter 2022
Instructors: Kaloudis, Naomi (Winter)
-
ENVR 203 Knowledge, Ethics and Environment (3 credits)
Overview
Environment : Introduction to cultural perspectives on the environment: the influence of culture and cognition on perceptions of the natural world; conflicts in orders of knowledge (models, taxonomies, paradigms, theories, cosmologies), ethics (moral values, frameworks, dilemmas), and law (formal and customary, rights and obligations) regarding political dimensions of critical environments, resource use, and technologies.
Terms: Fall 2021, Winter 2022
Instructors: Kosoy, Nicolas; Gobby, Jen (Fall) Vaccaro, Ismael; Hirose, Iwao (Winter)
Fall - Macdonald Campus; Winter - Downtown
Section 001: Downtown Campus
Section 051: Macdonald Campus
-
ENVR 400 Environmental Thought (3 credits)
Overview
Environment : Students work in interdisciplinary seminar groups on challenging philosophical, ethical, scientific and practical issues. They will explore cutting-edge ideas and grapple with the reconciliation of environmental imperatives and social, political and economic pragmatics. Activities include meeting practitioners, attending guest lectures, following directed readings, and organizing, leading and participating in seminars.
Terms: Fall 2021, Winter 2022
Instructors: Kosoy, Nicolas; Garver, Geoffrey (Fall) Sieber, Renee; Graham, Peter; Garver, Geoffrey (Winter)
Fall - Macdonald Campus; Winter - Downtown
Section 001: Downtown Campus
Section 051: Macdonald Campus
Prerequisite: ENVR 203
Restriction: Open only to U3 students, or permission of instructor
-
FACC 220 Law for Architects and Engineers (3 credits)
Overview
Faculty Course : Aspects of the law which affect architects and engineers. Definition and branches of law; Federal and Provincial jurisdiction, civil and criminal law and civil and common law; relevance of statutes; partnerships and companies; agreements; types of property, rights of ownership; successions and wills; expropriation; responsibility for negligence; servitudes/easements, privileges/liens, hypothecs/ mortgages; statutes of limitations; strict liability of architect, engineer and builder; patents, trade marks, industrial design and copyright; bankruptcy; labour law; general and expert evidence; court procedure and arbitration.
Terms: Fall 2021
Instructors: Crowe, Joshua; Baril-Furino, Alexandre (Fall)
(3-0-6)
-
FACC 500 Technology Business Plan Design (3 credits)
Overview
Faculty Course : This course combines several management functional areas such as marketing, financial, operations and strategy with the skills of creativity, engineering innovation, leadership and communications. Students learn how to design an effective and winning business plan around a technology or engineering project in small, medium or large enterprises.
Terms: Fall 2021
Instructors: Wong, Derrick (Fall)
-
FACC 501 Technology Business Plan Project (3 credits)
Overview
Faculty Course : Students work in teams to develop a comprehensive business plan project based on a technological or engineering innovation while utilizing site visits.
Terms: Winter 2022
Instructors: Wong, Derrick; Avedesian, Michael M (Winter)
-
HISP 225 Hispanic Civilization 1 (3 credits)
Overview
Hispanic Studies (Arts) : A survey of historical and cultural elements which constitute the background of the Hispanic world up to the 18th century; a survey of the pre-Columbian indigenous civilizations (Aztec, Maya and Inca) and the conquest of America.
Terms: Fall 2021
Instructors: Jouve-Martin, Jose (Fall)
Fall
Taught in English
-
HISP 226 Hispanic Civilization 2 (3 credits)
Overview
Hispanic Studies (Arts) : A survey of the constitution of the ideological and political structures of the Spanish Empire in both Europe and America until the Wars of Independence; a survey of the culture and history of the Hispanic people from the early 19th Century to the present.
Terms: Winter 2022
Instructors: Jouve-Martin, Jose (Winter)
Winter
Taught in English
-
INDR 294 Introduction to Labour-Management Relations (3 credits) *
Overview
Industrial Relations : An introduction to labour-management relations, the structure, function and government of labour unions, labour legislation, the collective bargaining process, and the public interest in industrial relations.
Terms: Fall 2021, Winter 2022
Instructors: Westgate, Chantal (Fall) Westgate, Chantal (Winter)
-
INTG 201 Integrated Management Essentials 1 (3 credits) **
Overview
INTG : Essentials of management using an integrated approach. Three modules (managing money, managing people and managing information) cover fundamentals of accounting, finance, organizational behaviour and information systems; and illustrate how the effective management of human, financial and technological resources contributes to the success of an organization. Emphasizes an integrated approach to management, highlighting how organizations function as a whole and the importance of being able to work across functional and organizational boundaries.
Terms: Fall 2021
Instructors: Blanchette, Simon (Fall)
Only open to U1, U2, U3 non-Management students. Not open to students in the Desautels Faculty of Management or students who have taken two or more of courses MGCR 211, MGCR 222 or MGCR 341.
Limited enrolment; priority registration to students in Minors in Entrepreneurship. Note: this course is not part of the Desautels Minors in Management, Finance, Marketing or Operations Management (for non-Management students).
-
INTG 202 Integrated Management Essentials 2 (3 credits) **
Overview
INTG : Essentials of management using an integrated approach. Four modules (managing customer relationships, managing processes, managing digital innovation and managing the enterprise) cover fundamentals of marketing, strategy, operations and information systems; and illustrate how this knowledge is harnessed in an organization to create value for customers and other stakeholders. Emphasizes an integrated approach to management, highlighting how organizations function as a whole and the importance of being able to work across functional and organizational boundaries.
Terms: Winter 2022
Instructors: Blanchette, Simon (Winter)
Restriction(s): Only open to U1, U2, U3 students. Not open to students in the Desautels Faculty of Management or students who have taken two or more of courses MGCR 331, MGCR 352, MGCR 423 or MGCR 472.
Limited enrolment; priority registration to students in Minors in Entrepreneurship. It is suggested that students take INTG 201 prior to INTG 202, but is not required. Note: this course is not part of the Desautels Minors in Management, Finance, Marketing or Operations Management (for non-Management Students).
-
MATH 338 History and Philosophy of Mathematics (3 credits)
Overview
Mathematics & Statistics (Sci) : Egyptian, Babylonian, Greek, Indian and Arab contributions to mathematics are studied together with some modern developments they give rise to, for example, the problem of trisecting the angle. European mathematics from the Renaissance to the 18th century is discussed in some detail.
Terms: Fall 2021
Instructors: Kamran, Niky (Fall)
Fall
-
MGCR 222 Introduction to Organizational Behaviour (3 credits) *
Overview
Management Core : Individual motivation and communication style; group dynamics as related to problem solving and decision making, leadership style, work structuring and the larger environment. Interdependence of individual, group and organization task and structure.
Terms: Fall 2021, Winter 2022, Summer 2022
Instructors: Ferguson, John-Paul; Blanchette, Simon; Mahabadi, Sara; Al Hajj, Raghid (Fall) Dakhlallah, Diana; Reyt, Jean-Nicolas; Galperin, Roman (Winter) Westgate, Chantal (Summer)
Restriction: Not open to U0 students.
-
MGCR 352 Principles of Marketing (3 credits) *
Overview
Management Core : Introduction to marketing principles, focusing on problem solving and decision making. Topics include: the marketing concept; marketing strategies; buyer behaviour; Canadian demographics; internal and external constraints; product; promotion; distribution; price. Lectures, text material and case studies.
Terms: Fall 2021, Winter 2022, Summer 2022
Instructors: Etemad, Hamid; Han, DaHee; Cyrius, Fabienne (Fall) Dor茅, Bruce; Sarigollu, Emine; Forget, Marie-Elyse; Cyrius, Fabienne; Maziarz, Christopher (Winter) Han, Jung Ho (Summer)
Restrictions: Open to U1, U2, U3 students.
-
ORGB 321 Leadership (3 credits) *
Overview
Organizational Behaviour : Leadership theories provide students with opportunities to assess and work on improving their leadership skills. Topics include: the ability to know oneself as a leader, to formulate a vision, to have the courage to lead, to lead creatively, and to lead effectively with others.
Terms: Fall 2021, Winter 2022, Summer 2022
Instructors: Hewlin, Patricia (Fall) Sonberg, Melissa (Winter) Gauvin, Tatiana (Summer)
Prerequisite: MGCR 222 or permission of Instructor and approval of the BCom Program Office.
Restrictions: Restricted to U2 and U3 students.
-
ORGB 423 Human Resources Management (3 credits) *
Overview
Organizational Behaviour : Issues involved in personnel administration. Topics include: human resource planning, job analysis, recruitment and selection, training and development, performance appraisal, organization development and change, issues in compensation and benefits, and labour-management relations.
Terms: Fall 2021, Winter 2022
Instructors: Gauvin, Tatiana (Fall) Gauvin, Tatiana (Winter)
Prerequisite: MGCR 222
Requirement for the Institute of Internal Auditors
* Note: Management courses have limited enrolment and registration dates. See Important Dates at .
** Note: INTG 201 and INTG 202 are not open to students who have taken certain Management courses. Please see the INTG 201 and INTG 202 course information for a list of these courses.
*** If you are uncertain whether or not a course principally imparts language skills, please see an adviser in the 缅北强奸 Engineering Student Centre (Frank Dawson Adams Building, Room 22) or email an adviser.
Note regarding language courses: Language courses are not accepted to satisfy the Complementary Studies Group B requirement, effective for students who entered the program as of Fall 2017.
Typical Program of Study
Students entering the program from CEGEP follow a different course of study from those entering from out of province. Students will be advised by the Department as to which courses they should select from the course lists above.
For a detailed curriculum, see .
For all minors and concentrations, students should complete a Course Authorization Form, available from the 缅北强奸 Engineering Student Centre (Student Affairs Office) (Frank Dawson Adams Building, Room 22) or from the Undergraduate Program Coordinator, indicating their intention to take the minor or concentration.
Faculty of Engineering—2021-2022 (last updated Nov. 29, 2021) (disclaimer)
